Any questions?
Address frequently asked questions about this product to minimize any concerns or uncertainties that might deter a customer from making a purchase.
Roof Rack Crossbars for Kia Sedona 2015-2021
Roof Rack Crossbars for Kia Sedona 2015-2021
In stock
Regular price
$149.99
Sale price
$149.99
Regular price
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
- Fully Secure Checkout
- Authorized Part Dealer
- Trusted by Thousands
Question about this product?
We're happy to help.
Flush-Rail Roof Rack Cross Bars — Lockable Aluminum Pair — 220 lb / 100 kg
Low-profile roof rack cross bars engineered for vehicles with factory flush (integrated) roof rails—the type with no gap between the rail and roof. Secure lockable clamp feet with rubberized interfaces and a top channel for sliders/T-bolts — ideal for roof boxes, cargo baskets, bike/kayak/ski carriers, and camping gear.
Why Choose These Roof Rack Bars
- Real capacity: Up to 220 lb / 100 kg (never exceed vehicle/roof ratings).
- Anti-theft security: Integrated lock & keys help deter removal.
- Flush-rail specific feet: Rubberized clamp system designed to grip the inner edge/track of flush (integrated) rails.
- Accessory-ready: Top channel for sliders/T-bolts fits many common roof rack mounts and carriers.
- Adjustable spread: Slide the feet along the bars to set ideal front/rear spacing for your vehicle.
- All-weather build: Rust-resistant aluminum, coated hardware, and rail-protecting rubber pads.
- Lower wind noise: Aerodynamic crossbar profile helps reduce drag and noise.
- No drilling: Clamp-on installation to factory flush rails.
Condition
New: Brand-new, unused, unopened, undamaged item in its original packaging (where applicable).
Technical Details
| Item | Roof Rack Cross Bars (Front + Rear) |
| Compatibility | For vehicles with factory flush (integrated) roof rails — not for bare roofs or raised rails. |
| Capacity | 220 lb / 100 kg (do not exceed vehicle/roof ratings) |
| Material | Aluminum bars; coated hardware; rubber interfaces |
| Finish | Black, low-gloss |
| Features | Lockable, Adjustable, Top channel (T-bolt/slider), No Drilling, Aerodynamic, Rust-Resistant, Water-Resistant, Flush-rail clamp feet |
| Placement on Vehicle | Roof (front & rear bars) |
| Number of Pieces | 2 (pair) |
Fitment Tip: For flush (integrated) roof rails only. Ensure the feet clamp the rail’s inner edge/track firmly and pads sit flat. Always verify your vehicle’s roof/cargo ratings and use proper tie-downs.
What’s in the Box
- 2 × Roof Rack Cross Bars (Front & Rear)
- Complete Mounting Hardware
- Lock & 2 Keys
- Quick Install Guide
Quick Install Guide
- Slide the clamp feet into the aluminum crossbars (leave slightly loose).
- Place bars on the roof and align feet over the flush rail inner edge/track.
- Adjust the feet to match your rail width; pads must sit flat and fully contact the rail.
- Evenly tighten both sides with the supplied hex key until snug—do not overtighten.
- Re-check all fasteners and pull test: bars must not move by hand.
- Install/end caps, align plastic covers, and confirm rubber pads are fully seated.
- Close covers and lock the feet; store the spare key safely.
- Do not use with an open sunroof; verify clearance after install.
Tip: Many vehicles are narrower at the rear. Use the shorter bar at the rear and the longer at the front (if applicable).
Correct Bar Orientation
Install with the profile’s front lip facing the vehicle’s FRONT. Both crossbars must face the same direction; incorrect orientation can increase wind noise.
Confirm your vehicle has flush (integrated) roof rails and check rail spacing before purchase. Never exceed the lowest-rated component (vehicle roof, rails, bars, or accessories).
